cecotec ENERGYSILENCE AERO 5290 WHITEWOOD Manual De Instrucciones página 46

ENGLISH
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Fan
- Assembly kit
- Remote control
- Control battery (2xAAA)
- Instruction manual
3. ASSEMBLY
Pre-assembly preparation
- To prevent personal injury and damage, make sure that the location where the appliance is
going to be installed allows a 2.3-metre clearance from the blades to the floor and a 76-cm
clearance from the blades to any wall or object. Fig. 3
- Make sure that the building structure can hold the full weight of the fan.
- This fan can be installed on a normal or vaulted ceiling with a downrod. The hanging length
of the fan can be extended with a longer rod.
- Ensure that the junction box is securely fastened to the building structure and can support
the full weight of the fan.
- Installation requires the following tools: screwdriver, flat screwdriver, adjustable pliers or
spanner, ladder, wire cutters and electrical tape.
- This fan can be mounted with a rod on a normal or vaulted ceiling. Fig. 4
Fig. 4 key:
A. Standard assembly
B. Pitched roof mounting
Hanger bracket installation
Wooden ceiling. Fig. 5
Concrete ceiling. Fig. 6.
Drill a φ8 mm hole in the masonry ceiling and insert the bolt. Align the bracket with the
1.
hole and tighten it with the nut.
Fan assembly and suspension. Fig. 7
Fig. 7 key:
1. Electric wiring
46
ENERGYSILENCE AERO 5290 WHITEWOOD / BLACKWOOD