MIXING THE FUEL
FUEL MIXTURE
This product is powered by a 2-cycle engine and
requires pre-mixing gasoline and 2-cycle lubricant.
Pre-mix unleaded gasoline and 2-cycle engine
lubricant in a clean container approved for gaso-
line. DO NOT mix quantities larger than usable in
a 30-day period.
Recommended fuel: This engine is certified to
operate on unleaded gasoline intended for auto-
motive use.
NOTE: We recommend you use premium 2-cycle
lubricant, PowerCare 2-cycle lubricant (6.4 oz.
or 16 oz.), or an equivalent high-quality synthetic
2-cycle lubricant in this product. Mix at 2.6 oz.
per gallon (US).
Do not use automotive lubricant or 2-cycle outboard
lubricant.
HIGH QUALITY 2-CYCLE ENGINE LUBRICANT
GASOLINE
1.0 gal. (US) (3.8 liter)
2.5 gal. (US) (9.5 liter)
OPERATION
FILLING THE FUEL TANK
See Figure 2.
Clean the surface around the fuel cap to prevent
Loosen the fuel cap slowly, by turning counter-
Carefully pour the fuel mixture into the tank.
Prior to replacing the fuel cap, clean and inspect the
Immediately replace the fuel cap and hand
Move at least 30 ft. away from refueling area
NOTE: It is normal for the engine to emit smoke
during and after the first use.
LUBRICANT
2.6 oz. (76 ml)
6.4 oz. (189 ml)
Page 13
contamination.
clockwise.
Avoid spillage.
gasket.
tighten, by turning clockwise. Wipe up any fuel
spillage.
before starting the product.
Fig. 2