Sony RM-V701 Manual De Instrucciones página 2

Notes
Step 1: Entering the Code Number
then press and release 3.
6 Press and release the ENTER button to store the
E R
component .
3 Check that the other buttons of the Commander is operating the
corresponding functions of the component.
Tip
Searching for the Correct Code
2 Set the VISUAL/AUDIO selector and the slide
Switch to the position that corresponds to the
|
6 When the correct code is found, press and
release the ENTER button to store the code
number in the Commander's memory.
operates.
Positions
VISUAL AUDIO
vend
e
2 Set the slide switch to the position whose
component type is to be changed.
Note
You cannot change the component type on the TV and VCR
positions. $
3 Press and release the S (Set) button.