Publicidad
Idiomas disponibles
Idiomas disponibles
Remote Button Descriptions
RM-V701
General
[1] To set up the Commander.
[8] *Volume up: +
Volume down: —
[9] "To mute the volume on TV or
receiver (amplifier).
[10] To switch to the operation of each
component. Select the position on
which the desired component is
assigned with the VISUAL/
AUDIO selector and the slide
Switch.
RM-V801
[11] To turn on and off the power of
the selected component.
* These buttons control the volume
of either TV or recciver (amplifier).
See "Controlling the Volume of
Video Components Connected to
an Audio System" for details.
Operating a TV, VCR or Cable box
[2] TV: To display the current
channel on TV.
VCR: To expose the on-screen
display (Sony VCR only).
To change the input mode.
To change the channel.
For
example, to change to channel 5,
press 0 and 5 (or, press S and
ENTER.)
TV: To move the cursor of the
MENU display upward,
downward,
left, or right
VCR:
b: To play.
M: To stop.
«a. To rewind.
P: To fast-forward.
[7] TV: To call up the MENU display
VCR: To record, press & whilc
` pressing O.
[12 TV: To operate the Picture-in-
Picture function.
Pressing each button while
pressing the PIP button operates
as the table below.
ft3 TV: To operate SLEEP function.
reo
lei
PIP operations
(14 To change the channel. For
example, to change to channel 5,
press 5 and ENTER.
15 TV: To enter the selection of the
MENU displav.
VCR: To pause
(16 Channel up: +
Channel down: —
[17] TV/Cable box: To operate JUMP,
FLASHBACK or CHANNEL
"RETURN function on the
1V
depending on the setting of the
TV's brand.
Notes
.
* There may be cases you may turn
on/off the cable box by pressing
the CH+ or CH- buttons on the
Commander.
* If your cable box can control
volume, be sure to set its volume
control to a medium position. If
the volume on the cable box is
turned down completely, you will
not be able to adjust your TV's
volume with the Commander.
I
Press
To
PIP and DISP
Turn on/off the "window" picture.*
PIP and ENTER
Turn off the "window" picture.
PIP and CH+ or CH-
Change the TV channel in the "window" picture.
PIP and TV/VIDEO
Change the input mode of the "window" picture.
PIP and 1
Move the location of the "window" picture.
PIP and 2
Swap the "main" picture and thc "window" picture.
PIP and 3
Freeze the "window" picture.
* If the "window" picture does not turn off this way, try pressing ENTER while
pressing PIP.
Operating a DBS tuner
[3] To switch the output of the DBS
receiver to the TV. (When vou
connect a TV cable or antenna to
the receiver, the output switches
between a TV and DBS progra.)
[4] To change the channel.
For
example, to change to channel 5,
press 0 and 5 (or press 5 and
ENTER).
[5] To bring up the Master Guide.
[6] To scroll through the Master
Guide.
To call up the MENU display.
[13 To bring up the Station Index.
Operating a Receiver
[4] To select the input source:
1selects VIDEO 1
2sclects VIDEO 2
Bselects AUX
Aselects TUNER
5selects CD
6selects TAPE 1
7selects TAPE 2
8sclects TV
9selects PHONO
(0 switches to another input
source by each pressing).
(14 To change the channel.
For
example, to change to channel 5,
press 5 and ENTER
45 To select the channel that's
highlighted.
To bring up the Station Index
when a program guide ts not
_ _
displayed
HS Channel up: +
Channel down: -
To page through the guide when
a program guide is displayed.
[17] To tune to the last tuned station.
ie Presetting frequency up: +,
down: -
Tuning frequency up: +,
down: -
[17] To shift band (FM/AM).
Operating a CD player, MD deck, DAT deck, or tape deck
[2] CD player/MD deck/DAT deck:
To select numbers 10 and abovc.
For example, to sclect track 15,
press DISP and then press 5.
[4] CD player/MD deck/DAT deck:
To select the track number.
0
selects track 10. To select track
numbers above 10, see the
descriptions in |2] above.
Tape deck: To select the tape
deck and direction:
1 selects Deck A (dual cassette:
deck only").
2 selects Deck B(dual cassette
deck only").
O functions as 4 reverse button,
or switches play sides.
(The other buttons do not have
assigned functions)
[6: >: To plav
E: To stop
*
To select the previous track
or to rewind.
We»: To select next track or to
fast-forward
[7] MD/DAT/Tape deck: To record,
press & while pressing €. First
release P, then relcase 6.
[15 To pause.
(17) CD player/MD deck: To select
next disc.
Tape deck: To select deck A or
deck B (dual cassette deck
onlv**).
* If your deck's commander has two
sets of tape operating buttons and
has no A/B button for deck
selection, use the numeric buttons
(land 2): button J selects Deck A,
and button 2 selects Deck B.
"Et the deck's commander has one
set of tape operating buttons, and
has an A/B button for the deck
selection, use the RECALL button to
select Deck A or B
Specifications
Operable distance
RM-V701: Approx. 10 m (33 ft)
RM-V801:
Approx. 7 m (23 ft)
(varies depending of the component of each
manufacturer)
Power requirements
— RM-V701: Two size AA (R6) batteries (not supplied)
RM-V801:
Vanadium-Lithium Rechargeable Battery
(3.0 V, 50 mAh)
Flexible Hydrogenated Amorphous Silicon Solar Cells
Battery life (RM-V701 only)
Approx. 6 months (varies depending on frequency of
use)
Dimensions
RM-V701: Approx. 63 x 200 x 38 mm (w/h/d)
-(2/.,x77/,Xx 1. in)
RM-V801:
Approx. 74 x 210 x 25 mm
(w/h/d)
(3x8x1l
in.)
Mass
RM-V701: Approx. 105 g (3.7 oz.)
Supplied accessory
Label (2)
RM-V801: Approx.
140 g (4.9 02.)
Design and specitications are subject to change without notice.
Publicidad
