Descargar Imprimir esta página

Snap-On CDRS761 Traducción De Las Instrucciones Originales página 7

Taladro recto inalámbrico/ destornillador recto inalámbrico

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 73
13. Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
14. Do not recharge non-rechargeable batteries.
15. Never attempt to connect two chargers together.
16. Have your charger serviced by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the charger is maintained.
17. For the location of the nearest Snap-on repair center,
please call Snap-on customer service at 1-877-762-
7664.
18. To reduce risk of battery explosion, follow these
instructions and those marked on the battery.
19. Never smoke or allow an open spark or flame in the
vicinity of the battery or engine.
20. Never charge a frozen battery.
21. Do not operate charger in a closed-in area or restrict
ventilation in any way.
22. Do not use an extension cord unless absolutely
necessary. If an extension cord must be used, make
sure that the:
— Pins on the plug of the extension cord are the
same number, size and shape of those of the plug
on the charger,
— Extension cord is properly wired and in good
electrical condition, and
— Wire size is large enough for AC ampere rating of
charger as follows
100-120 Volt
Charger
Cord Length (feet)
25
50
100
220-240 Volt
Charger
Cord Length
(meters)
50
75
Recommended Extension Cord Length
SAVE THESE
INSTRUCTIONS
ZCDRS761CE Rev. B
Wire Size (AWG)
18
18
18
Wire Size (mm)
0.75
1.0
7
Functional Description
A
C
D
E
F
G
H
Figure 1: CDRS761/CTSS761
A – Drill Chuck
B – Quick Disconnect
C – Torque Adjusting Ring
D – LED Light
E – Fuel Gauge
F – Variable Speed Trigger Forward/Reverse
Switch
G – Release Button
H – Battery Pack
Specifications
Drill Specifications (CDRS761)
Motor Voltage ........................................14.4 VDC
Chuck Capacity (keyless) ............... 3/8" (9.5 mm)
Stall Torque ............................. 65 in. lb. (7.3 N•m)
Free Speed .......................................0-1350 RPM
Weight with Battery Pack ............. 2.6 lbs. (1.2 kg)
Length ......................................13.3" (337.8 mm)
Height ..........................................3.3" (83.8 mm)
Width ............................................2.0" (50.8 mm)
Operating Temperature .........................................
................................. -4°F(-20°C) to 140°F(60°C)
Storage Temperature.............................................
................................. -4°F(-20°C) to 140°F(60°C)
Noise* (Tested in accordance with ISO 15744)
Sound Pressure Level (A) .......................80.4 dB
Uncertainty, K ...........................................3.0 dB
Sound Power Level (A) ...........................89.6 dB
Uncertainty, K ...........................................3.0 dB
Vibration* (Tested in accordance with ISO 28927)
Vibration Level .......................................1.3 m/s
Uncertainty, K ........................................1.5 m/s
B
C
D
E
F
G
H
2
2
(04/19)

Publicidad

loading

Este manual también es adecuado para:

Ctss761