Descargar Imprimir esta página

Snap-On CDRS761 Traducción De Las Instrucciones Originales página 8

Taladro recto inalámbrico/ destornillador recto inalámbrico

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 73
Screwdriver Specifications
(CTSS761)
Motor Voltage ........................................14.4 VDC
Drive ..................................1/4" Quick Disconnect
Output Torque/Stall Torque ..... 65 in. lb. (7.3 N•m)
Free Speed ........................................0-1350 RPM
Weight with Battery Pack ............. 2.2 lbs. (1.0 kg)
Length ....................................... 11.8 (299.7 mm)
Height ..........................................3.3" (83.8 mm)
Width ............................................2.0" (50.8 mm)
Operating Temperature .........................................
................................. -4°F(-20°C) to 140°F(60°C)
Storage Temperature.............................................
................................. -4°F(-20°C) to 140°F(60°C)
Noise* (Tested in accordance with ISO 15744)
Sound Pressure Level (A) .......................75.6 dB
Uncertainty, K ...........................................3.0 dB
Sound Power Level (A) ...........................86.4 dB
Uncertainty, K ...........................................3.0 dB
Vibration* (Tested in accordance with ISO 28927)
Vibration Level .....................................1.22 m/s
Uncertainty, K ......................................1.50 m/s
*These declared values were obtained by
laboratory type testing with the stated standards
and are not adequate for use in risk assessments.
Values measured in individual work places may be
higher. Values and risk of harm experienced by an
individual user are unique and depend upon the
environment and manner in which the user works,
the work piece and the workstation design, as well
as upon the exposure time and the physical
condition of the user.
Snap-on disclaims liability for the consequences of
using the declared values, instead of values
reflecting the actual exposure determined in an
individual risk assessment in a work place situation
over which we have no control.
Symbology
SYMBOLOGY
REFER TO INSTRUCTION
MANUAL/BOOKLET
WEAR EYE PROTECTION
WEAR EAR PROTECTION
VIBRATION HAZARD
ZCDRS761CE Rev. B
n
xxx/min
0
2
2
BC
8
VOLTS
DIRECT CURRENT
NO LOAD SPEED
CE MARK
CANADIAN - UNITED STATES
UNDERWRITERS LABORATORY
FCC
FEDERAL COMMUNICATIONS
COMMISSION
JAPAN ELECTRICAL SAFETY
TÜV RHEINLAND
DOUBLE INSULATION
BACK FEED PROTECTION
PROPERLY RECYCLE BATTERY
DO NOT THROW IN GARBAGE
CALIFORNIA - TITLE 20
COMPLIANT
(04/19)

Publicidad

loading

Este manual también es adecuado para:

Ctss761