Sanyo DS27930 Manual Del Propietário página 17

CLOSED-CAPTIONING
Captioning is text information transmitted along with the picture and sound so it can be dis-
played on the TV screen. Because different types of captions can be transmitted with the TV
signal, separate captioning modes are provided. The captioning modes recognized by this
model are: Captionl, Caption2, Textl, and Text2. Local broadcasters decide which caption
signals to transmit.
CAPTIONI: This is the main mode used for program captioning (words
match the program you are watching). These captions are generally one or
two lines.
CAPTION2: This is an alternative mode for program captioning.
Caption2 may be used by the broadcaster to provide captions in another
language, such as, Spanish or French.
TEXTI: This mode is used to display large amounts of text. This text will
appear within a black box that may be nearly as large as the TV screen.
Text displayed in this manner does not generally relate to the program.
These captions may be used by broadcasters to provide weather reports,
community bulletins, etc.
TEXT2: This is an alternative mode used to display large amounts of text texll/2
(same as Textl).
QUIKCAP: Quikcap allows captions to toggle on and off with the Mute fi.mction. Press the
MUTE key on the remote control to block the TV sound; the captions display automatically.
Press the MUTE key again to restore the sound, the captions will disappear. Quikcap displays
program captions in the Captionl mode.
Caption1! 2
SETTING CAPTIONS
1. Press the CAPTION key on the remote control.
2. Press the 0 key to select options: OFF, CAPTION1, CAPTION2, TEXT1, TEXT2, or
QUIKCAP.
CARE AND CLEANING
CLEANING THE CABINET
• If Caption Textmode is
selected and NO
captioned text is broad-
casted, a black box
may appear and
remain on the TV
screen as showR
below.
To remove this black
box, set captioning to
any mode other than
Text1or Text2or press
the RESET key to
cancel captioning and
other customized
settings.
;:• Channel number will
not display continu-
ously when captioning
is on.
Need help?
Visitour Websiteat
www.sanyoctv.com
or Call 1-800-877-5032
The surface of the cabinet can be dmnaged if not properly maintained. Many common household aerosol
sprays, cleaning agents, solvents and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the cabinet with a soft dry cloth.
CLEANING THE TELEVISION SCREEN
1. Use a soft cloth moistened with a non-alkaline diluted soap solution. Gently rub surfi_ce until it is fully dry.
Notes: _Ve_,er spray liquids on the screen because they can run down and drip onto
the chassis. This may cause component failure not covered under Wan'anty.
Xm,er try to polish away any stain or other blemish, or use an abrasive material on the screen surface as this
action may permanently damage the surface of the picture tube.