Sanyo DS27930 Manual Del Propietário página 4

BASIC SET-UP AND CONNECTIONS
• TheTVwillautomati- ;_
cally select the correct
Antenna mode for the
type of RFsignal you
connecL
• TV will switch off
automatically after 15
minutes if there is no
signal reception (cable
out or station not
broadcasting).
Exception--When the
Videomode is selected,
the TV will not automati-
cally switch off when
signal reception has
stopped for 15minutes.
• ffyou move the TV to a
new location, press the
RESET key twice after
connecting the signal
and turning on the TV.
Need help ?
Visitour Websiteat
www.sanyoctv.com
or Call1-800-877-5032
CAW FRANCHISE NOTE:
Cablecompanies, like public
utilities, are franchised by
local governmentauthorities.
To receivecable programs,
even with equipmentwhich
is capableof receivingcable
channels,the consumer
must subscribe to the cable
company's service.
INITIAL SET-UP
1. Install batteries in remote control, see page 7.
2. Connect signal, see below.
3. Plug in AC power cord.
4. Press POWER key to turn on TV.
5. Follow on-screen instructions.
CONNECTING CABLE SERVICE, RF ANTENNA, OR SATELLITE DISH
RECEIVER TO TV
0 Cable Service 0 Satellite Receiver 0 RF Antenna
S-Video Input Terminal
TV Back
To enhance video detail use the S-Video AVI
and AV2 jacks instead of the Video jacks, if It .............. i_;[6_s)ki_i?, @;ii:i .......
available on your external equipment. _' .........
(S-Video connections will oven'ide con- I[ ] _v'_°'_
nectionSAudio Outputt° the JacksaV input jacks.)(See page 5.) __? _)UHF_,}j
Connect external audio equipment here.
(See page 6.) _Au_dio/Video
In
480i Component Video In Jacks
(Component 3, Y, Pb, Pr)
Connect digital video equipment here. (See
page 6.)
,ut Jacks (AV1 / AV2)
Connect video eqmpment here (see
pages 5 _- 6).
Note: S-Video connections oven'ide the
AV1 and AV2 video connections.
POSITIONING THE TV
Do not position the TV in a confined
area. Allow space for normal air
circulation around electronic parts.