Descargar Imprimir esta página

Aiwa NSX-A767 Manual De Instrucciones página 15

Sistemas estéreo con reproductor de discos compactos

Publicidad

Idiomas disponibles

Idiomas disponibles

When an FM stereo broadcast
contains noise
Press MONO TUNER while pressing SHIFT on the remote control
so that "MONO appears on the display.
Noise is reduced, "although reception is monaural
To restore stereo reception, repeat the above so that "MONO"
disappears.
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press POWER while pressing <>.
To reset the interval, repeat this procedure.
P..?-—–
I
R
..–-
–Il.
.
EEm!l
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
7
Press TUNER/BAND
to select a band, and press
4+
DOWN or -
UP to select a station.
2 Press 11 SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Preset number
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored,
m
"FULL" is displayed if you attempt to store more than 32 preset
stations.
... - ,
PRESET""NU"MBER TUNING'
"'"
Use the remote control to select the preset number directly.
1
2
Press BAND while pressing
SHIFT to select a
band.
Press numbered
buttons O-9 and +"1 O to select a
preset number.
Example:
To select preset number 20, press +10, +10 and O.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main urlit
Press TUNER/BAND
to select a band. Then, press 4E
repeatedly or turn MULTI JOG.
Each time •~
is pressed, the nexl ascending
number is
selected.
To clear a preset station
Select the preset inumberof the station to be cleared. Then, press
CLEAR, and press 11 SET within 4 seconds,
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
ENGL/SH
15

Publicidad

loading

Este manual también es adecuado para:

Cx-na767Sx-na772Sx-r275