Publicidad
Idiomas disponibles
Idiomas disponibles
,.
RANDOM iREPEAT PLAY"
'""" ""' """
Use the remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT
while pressing SHIFT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — CL lights up on the display.
RANDOM/REPEAT play — RANDOM and C& light upon the
display,
Cancel — RANDOM and CL disappear from the display.
llplav
all discs, press +-
to start play.
To tAav a sirmle disc, press one of DISC DIRECT PLAY 1-3 to
start play.
During random play it is not possible to skip to the previously
played track with +.
., ..'..:
,.
:'.''.',!., : ,, ~ , ,",,..!*, "".
BiANK SKIP"'-PLAY'" '"" ~ '"'~
The silent portions between tracks recorded on a CD can be
skipped during playback.
f Press
CD BLANK
SKIP.
"CD BLANK SKIP ON" is displayed and a small dot appears
in the display.
Small dot
2 Press 4E
to start playback.
The silent portions between tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion also will be skipped.
To return to normal
playback
Press CD BLANK SKIP again, and "CD BLANK SKIP OFF" is
displayed and the dot in the display disappears.
m
* There may be a case where BLANK SKIP PLAY does not
function correctly.
* BLANK SKIP PLAY is automatically canceled when performing
Al EDIT RECORDING
(page 22), PROGRAMMED
EDIT
RECORDING (page 23), or recording during PROGRAMMED
PLAY (page 19) or RANDOM PLAY (page 19).
Up to 30 tracks can be programmed from any of the inserted
discs,
Pal
— , - +
2
5
44.-
Use the remote control.
1
2
3
4
5
Press PRGM twice while pressing SHIFT in stop
mode.
"PRGM" is displayed
PRGM
When PRGM is pressed once in step 1, the unit enters the
KARAOKE PROGRAM (page 25).
Press DISC DIRECT PLAY 1-3 to select a disc.
Go to the next step when the tray stops rotating.
Press numbered buttons 0-9 and +1 O to program
a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
Selected track number
Total number of selected tracks
Program number
Total playing time of
the selected tracks
Repeat
steps
2 and 3 to program
other
tracks.
Press 4P
to start play.
To check the program
Each time -
or >-
is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press
CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed
tracks
Clear the program and repeat all the steps again.
To play the programmed
tracks repeatedly
After programming
the tracks,
press RANDOM/REPEAT'
repeatedly while pressing SHIFT until ~
appears on the display.
m
During programmed
play, you cannot perform random play,
check the remaining time, and select a disc or track. "CAN'l-
USE" is displayed if you attempt to select a track.
"FULP is displayed if you attempt to program more than 30
tracks.
ENGLISH
1$)
Publicidad
