Publicidad
Idiomas disponibles
Idiomas disponibles
ITALA 135
OPERATING MANUAL
make sure there are no objects or people in the vicinity.
It is also general rule that, at maintenance performed, before restarting the machine, all components are
functions are verfied perfectly.
Scheduled maintenance, it is accompanied by the inspection maintenance during use, observing the state of
efficiency of particularly delicate parts. For safety reasons, the inspection will be paid to those components
visible and accessible, without manual intervention.
It is strictly forbidden to carry out any type of maintenance action while the machine is switched on.
Ordinary maintenance operations
The type of periodical maintenance for this machine is represented by the one scheduled. It includes operations on the
components such as lubrication, cleaning, adjustment, replacement, etc. to be performed with predefined deadlines.
Extraordinary maintenance operations
Extraordinary maintenance operations are all those operations not covered in this manual. Extraordinary maintenance
operations can be performed only by the manufacturer or those delegated by him.
13 PERIODICAL MAINTENANCE
The table "Periodic maintenance" reports frequencies and maintenance types to be carried out for each single component.
MODEL
ST / BT
Central brush
ST / BT
Dust filter
ST / BT
Oil level differential
ST / BT
Batteries start/traction
ST / BT
Extinguisher
ST / BT
Dust seals
ST / BT
Vacuum motor
ST
Motor oil *
*
ST
*
Motor air filter *
ST / BT
Nettoyage machine
* SEE THE GASOLINE ENGINE HONDA MANUAL ALSO
13.1 Central brush
13.1.1 Cleaning
Check that the brush is free of ropes, wires, or other material that will limit the optimum operation. If necessary, remove
completely the brush.
13.1.2 Track width control
Check that the width of the track left on the floor is 3 cm ca. width for the entire length of the brush.
13.1.3 Replacement
Replace the central brush when excessively worn.
WARNING
– Turn the key to position "OFF" and remove the key, before changing the brush.
WARNING
– In order to avoid damage to the floor, carefully choose the most suitable type of brush to the surface to
be treated.
1 Make sure the brush is raised off the ground. Make sure the key is turned to position "OFF";
CHECKING
DAILY
WEEKLY
V
V
V
V
V
V
28
MONTHLY
YEARLY
V
V
V
V
(every 3 month)
V
V
V
V
Publicidad
