Kenwood TK-7360H Manual De Instrucciones página 16

■ Removing an Autodial Entry
1 Press the key programmed as Autodial Programming.
2 Press / (if the key assignment list selection is configured as "Enabled") or <B/C> to select
a memory location number.
3 Press A or #.
• "DELETE" appears on the display.
• Additionally, you can press and hold A or # to delete all entries.
4 Press S or
R
EDIALING
1 Press the key programmed as Autodial.
2 Press , then 0.
• If there is no data in the redial memory, an error tone will sound.
3 Press the PTT switch to make the call.
S
TUN
This function is used when a transceiver is stolen or lost. When the transceiver receives a call
containing a stun code, the transceiver becomes disabled. The stun code is cancelled when the
transceiver receives a call with a revive code.
• "STUN" appears on the display while the transceiver is stunned.
10
to confirm the deletion.