Descargar Imprimir esta página

Parkside PDNB 6.3 C3 Traducción De Las Instrucciones Originales página 13

Punzonadora neumática para chapa

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 91
Check the speed after each use. The speed must
be checked regularly.
Perform a simple check of the vibration level after
each service and maintenance.
Only use original spare or replacement parts
from the manufacturer, otherwise the health and
safety of operators will be affected. If in doubt,
contact our service team.
Before servicing, clean the unit from hazardous
substances that have been deposited on it (due
to work processes). Avoid any skin contact with
these substances. If the skin comes into contact
with hazardous dusts, it may cause severe der-
matitis. If dust is generated or stirred up during
maintenance work, it can be inhaled.
Always wear protective gloves and a protective
mask!
The unit may only be operated and maintained
by instructed persons. Repairs may only be car-
ried out by qualified persons.
If possible, inspections, adjustments and mainte-
nance work should be carried out by the same
person or their deputy and documented in a
maintenance book.
Store the unit and its accessories in a dark, dry,
dust-free and frost-free place.
6. Disposal
The pneumatic power tool, accessories and pack-
aging* should be recycled in an environmentally
friendly manner.
For information on how to dispose of the discard-
ed machine and accessories, please contact your
local council or town/city administration.
The packaging is made of environmental-
ly friendly materials that you can dispose
of at your local recycling centres.
The Triman logo is valid in France only.
Observe the labelling of the packaging
materials when separating waste; these
are marked with abbreviations (a) and
numbers (b) with the following meaning:
1–7: Plastics/20–22: Paper and card-
board/80-98: Composites.
6.1 Environmental compatibility and
Material disposal
Lubricating oil must not get into the soil, water or
waste water. Lubricating oil is special waste that
must be disposed of accordingly. Observe the local
regulations. Dispose of the lubricating oil as well as
packaging containing residues at your local collec-
tion point, petrol station or oil dealer.
* Non-contaminated or cleaned packaging can be
recycled.
GB/IE/NI/CY/MT
13

Publicidad

loading

Este manual también es adecuado para:

435173 2304