Publicidad
Idiomas disponibles
Idiomas disponibles
2.2 Hazards due to ejected parts
Disconnect the nibblers or shears from the power supply before replacing the machine tool or accesso-
ries.
If the workpiece or accessories or even the machine tool itself break, parts can be ejected at high speed.
Impact-resistant eye protection must always be worn when operating the machine. The degree of protec-
tion required should be assessed separately for each individual use.
Ensure that the workpiece is securely fastened.
Ensure that metal offcuts are directed in such a way that they do not cause a hazard.
2.3 Hazards in operation
When using the nibblers and shears, the operator's hands may be exposed to hazards such as blows,
cuts as well as abrasions and heat.
– Avoid touching the cutting edge when the nibblers or shears are connected to the power source.
– Cutting with nibblers and shears produces sharp edges.
Wear protective equipment such as gloves, aprons and hard hats;
The operator and maintenance personnel must be physically able to handle the size, mass and power of
the machine.
Hold the machine properly: Be ready to counteract the usual or sudden movements - have both hands
ready.
Make sure your body is balanced and that you have a secure grip.
Enable command device to start and stop in case of power supply interruption.
Use only the lubricants recommended by the manufacturer.
Avoid direct contact with the machine tool during and after use, as it will have heated up.
Sharp tools should always be used.
Avoid unsuitable postures as they may make it impossible to react to normal or unexpected movements
of the nibblers or scissors.
Unexpected movement of the machine or breaking of the cutting edges can cause injury.
Be warned of the risk of explosion or fire with regard to the material being processed.
2.4 Hazards due to repetitive movements
When using nibblers or shears to perform work-related tasks, the operator may experience uncomforta-
ble sensations in the hands, arms, neck, shoulders or other parts of the body.
When using nibblers or shears, the operator should maintain a comfortable posture, ensuring a secure
grip and avoiding awkward postures or those that make it difficult to maintain balance. The operator
should change posture in the course of prolonged work, which can be helpful in avoiding discomfort and
fatigue.
If the operator experiences symptoms such as persistent or recurrent discomfort, aching, throbbing, pain,
tingling, numbness, burning or stiffness, these signs should not be ignored. The operator should report this
to the employer and consult a suitably qualified medical professional.
GB/IE/NI/CY/MT
9
Publicidad
