Cuda surgical EX400 Manual De Usuario página 11

Iluminador de xenón con regulador de luminosidad digital

Idiomas disponibles

6.2.1.1

(Refer to 8.1 LAMP REPLACEMENT) Disconnect power. Open the door. The lamp

positioning lever should be completely down(horizontal) to properly engage the lamp

and completely up (vertical) to release it. Raise the lever completely if not already

raised and firmly push the lamp to assure full engagement to the power connectors.

Lower the lamp engagement lever counter-clockwise, from vertical to horizontal, and

observe that the lamp rises slightly as it is engaged into proper operating position.

6.2.1.2

6.2.1.3

The EX400 digital control system communicates with Cuda

for it. Only Cuda

LIT-238 CUDA

SURGICAL

(English)

ENGAGE LAMP

CLOSE DOOR

Close the door completely. (Fan will continue to run with door open.)

INCOMPATIBLE LAMP MODULE INSTALLED

Install correct SYC0450 lamp.

Surgical lamps can be engaged by the positioning mechanism.

Surgical lamps designed

Rev. -

Date of Revision: 06/08/18

Page 11 of 147