Cuda surgical EX400 Manual De Usuario página 12

6.2.1.4
Installed lamp does not match the intended power (watts). EX400 units require a 400-watt lamp.
6.2.1.5
Lamp has been used more than 1000 hours. Install new SYC0450 lamp or one used
less than 1000 hours.The main screen always displays lamp hours, and notices are
displayed when a lamp is approaching the end of its useful lamp life. This screen is
displayed when the lamp has exceeded its usable lifetime.
6.2.1.6
In the event of a fan problem the unit will turn off the lamp and display this screen.
Turn off and restart the illuminator. If the fault persists the unit needs servicing
®
LIT-238 CUDA SURGICAL
(English)
INCORRECT WATTAGE LAMP INSTALLED
Install correct SYC0450 lamp.
LAMP HAS EXCEEDED USEABLE LIFE
FAN FAULT
Rev. -
Date of Revision: 06/08/18
Page 12 of 147