Descargar Imprimir esta página

Oxford Oximiser 601 Manual De Usuario página 7

Cargador de baterías y optimizador de acondicionado

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
Note:
The advanced electronic programming of the Oximiser 601 makes it almost impossible to create
any sparks which could otherwise ignite the gases that potentially might surround of a battery
when fi rst connecting the connection leads to the battery.
- If the mains power to the Oximiser 601 is turned on but the battery is not connected to the
charger, no power will be produced by this charger.
- If the battery connection leads are removed whilst is charging then power will still be produced
by this charger and therefore it is vital to follow the connection/disconnection instructions in this
manual to ensure that the two connectors do not touch together and cause a short circuit to occur.
(D) STANDARD EQUIPMENT AND OPTIONAL ACCESSORIES
The OXFORD Oximiser 601 is provided as standard with:
• An integral non-replaceable mains power cord
• Connection leads with fused ring lead connection for permanent battery connection complete
with a weather proof rubber cap
• Connection leads with crocodile battery clamps for easy short term connection
• Wall bracket and fi xing screws
Optional accessories are also available as follows:
• Part OF702 – Connection lead with crocodile battery clamps
• Part OF703 – Connection lead with fused ring leads, battery connectors and weather proof
rubber cap
• Part OF704 – Connector lead with cigarette accessory plug lead
• Part OF705 – 3 meter output extension lead
(E) SPECIFICATION
Voltage AC
Charging Current
Charging Voltage
Cooling:
Charger type:
Maximum dimensions:
Weight:
(F) DECLARATION OF COMPLIANCE
The Oximiser 601 conforms to the following:
Safety standards:
EN60335-1:2002+A11:2004+A1:2004+A12:2006+A2:2006+A13:2008+A14:2010,
EN60335-2-29:2004+A2:2010, EN62233:2008, PPP76001:2008 inc. ZEK 01.2-08
CE-EMC standards: EN55014-1:2006, EN55014-2/A1:2001, EN61000-3-2:2006; EN61000-3-3/
A2:2005
TUV/GS
Designed and manufactured by OXFORD PRODUCTS Ltd to the highest specifi cations.
Registered address: Oxford Products Ltd, De Havilland Way, Range Road, Witney, Oxfordshire,
OX29 0YA. UK.
220-240V AC, 50-60 Hz.
0.6 Amps rms
Nominal: 14.4V
Vented outer case
Class II battery charger
135mm x 88mm x 56mm
514g
7
GB
Oximiser 601 v.1

Publicidad

loading

Productos relacionados para Oxford Oximiser 601