Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
www.domo-elektro.be
everything about when the ingredients get stuck. This results in a better mixed dish.
Attention: Never use the stirrer when the motor unit is currently running.
STAND BY AND POWER SAVE MODE
•
Put the plug into the socket and place the jar onto the device. The power
indication light will turn on and the indication light around the PULSE - ON/OFF
button will light up red. The device is now in stand by mode.
•
When the device hasn't been used for 3 minutes, only the power indication light
will remain lit up. This is the power save mode. Push the ON/OFF button to take
the device out of the power save mode.
ON/OFF BUTTON
•
This button is the on/off button for the various programmes
•
To start a certain programme, select the programme you want by turning the
control knob to the programme you prefer. Press the on/off button afterwards.
•
The indication light surrounding the PULSE - ON/OFF button will now light up
blue.
•
Press the ON/OFF button once to stop the programme at any time.
PULSE BUTTON
•
This is the button to manually operate the pulse function. This button may be used
to blend at full power for a short duration.
•
To use the pulse function, the blender needs to be in stand by mode and the
speed setting control needs to be in OFF. Each time you press the pulse button,
the blender will blend at full power. The indication light surrounding the control
button will light up blue. When the pulse button is let go, the blender will
immediately return to stand by mode.
SPEED SETTING CONTROL
This blender has 10 continuous speed settings.
•
After the blender is in its stand by mode, turn the control knob clockwise.
•
The blender will start working at the selected speed. The more you turn
clockwise, the higher the speed will be.
•
When using the device, the indication light surrounding the PULSE - ON/OFF
button will light up blue.
•
The device will automatically shut off after 10 minutes. When this occurs, you
need to set the speed setting control back in its OFF position before you can start
over.
41
DO486BL
Publicidad
Tabla de contenido
