cecotec EnergySilence Aero 5200 Black Manual De Instrucciones página 48

ENGLISH
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Fan
- Remote control
- Remote control battery (2xAAA)
- Instruction manual
3. ASSEMBLY
Pre-assembly preparation
- To prevent personal injury and damage, make sure that the location where the appliance is
going to be installed allows a 2.3-metre clearance from the blades to the floor and a 76-cm
clearance from the blades to any wall or object. Fig. 3
- Make sure that the building structure can hold the full weight of the fan.
- This fan can be mounted with a rod on a normal or vaulted ceiling. You can make the fan
hang lower with a longer downrod. Fig. 4
- Installation requires the following tools: screwdriver, flat screwdriver, adjustable pliers or
spanner, ladder, wire cutters and electrical tape.
Fig. 4 key:
A. Standard assembly
B. Pitched roof mounting
Hanger bracket installation
- Wooden ceiling. Fig. 5
- Concrete ceiling. Fig. 6.
Drill a φ8 mm hole in the concrete ceiling and insert the bolt. Align the bracket with the
1.
hole and tighten it with the nut.
Fan assembly and suspension. Fig. 7
Fig. 7 key:
1. Electric wiring
2. Hanging ball holes
3. Clevis pin
4. Adapter
5. Canopy
6. Decorative cover
48
ENERGYSILENCE AERO 5200 BLACK | WHITE