cecotec EnergySilence Aero 5200 Black Manual De Instrucciones página 51

- The remote control is powered by 2 x 1.5 V-3AAA batteries.
Warnings
- The remote control operates through RF Wireless digital transmission technology. If both
the fan and the lamp are equipped with a switch, turn on the fan at top speed and turn the
light on before using the remote control.
- If the fan or the light cannot be controlled through the remote control, check if the batteries
in the remote control are in good conditions and if they make good contact, that the positive
and negative electrodes are in the correct position, and if the batteries are charged.
- If the fan or the light cannot be controlled through the remote control, check if there are
other remote-controlled appliances in the same area and check if the transmitter buttons
are pressed. Appliances with similar remote-control systems may cause interference.
- Pay attention to the appliance voltage. Too low a voltage may cause the remote control to
not work. The technical specifications are indicated in this manual.
- If the remote control is not going to be used for a long time, remove the batteries.
Changing the remote-control battery
The remote control requires 2 x 1.5 V-3 AAA batteries.
1. Open the battery compartment.
2. Insert the batteries into the battery compartment observing the polarity.
3. Close the compartment.
5. CLEANING AND MAINTENANCE
- Make sure to disconnect the fan before cleaning it.
- Do not immerse any of the parts of the appliance in water or splash them with any other
liquid.
- Do not use solvents or any other chemical products for cleaning.
- Use a soft, damp cloth to clean the surface of the appliance
6. TECHNICAL SPECIFICATIONS
Product reference: 08490 / 08491
Product: EnergySilence Aero 5200 Black / EnergySilence Aero 5200 White
Voltage: 220-240 V
Frequency: 50 / 60 Hz
Power: 62 W AC - Max 90 W
LED: 18 W
ENERGYSILENCE AERO 5200 BLACK | WHITE
ENGLISH
51