Blind Hem Stitch - Sears Kenmore 385.17626 Manual De Instrucciones

Blind Hem Stitch
fl_ Stitch width:
,f2_Stitch length:
Needle thread tension:
,_ Presser foot A:
2to3
Red zone
2to6
Zigzag foot
[_ WIDTH
[_ LENGTH
ENZ
@
@
_"/ Lightweight fabric
(2} Heavyweight fabric
¢_,.j Wrong side of fabric
On heavyweight fabrics that ravel, the raw edge
should be overcast first.Then fold the hem, as
illustrated, leaving 1/4" (0.4 cm to 0.7 cm) of the hem
edge showing.
Position the fabric on the machine so that the needle
just pierces the folded part of the fabric when the
needle comes over to the extreme left side of the
wide zigzag stitch. Lower the presser foot. After
hemming is completed, press both sides of the
finished hem. The top side of the fabric shows only
the blind stitches.
1/4" 1/4"
(7)
56