Publicidad
Idiomas disponibles
Idiomas disponibles
2.4 Changing the Light (optional)
Any replacement or maintenance of the LED lamps is intended to be made by the
manufacturer, its service agent or similar qualified person.
Replacement of incandescent lamps:
Disconnecting the power supply before carrying out the bulb replacement.
Hold and remove the light bulb cover.
Dismantle the old bulb by unscrewing it counterclockwise, replace by a new bulb
(Max. 15W) by screwing it clockwise, and make sure it is fixed in the bulb holder
tightly.
Reassemble the light cover and re-connect your fridge to the power supply.
(Above is only reference. The actual configuration will depend on the physical product or
statement by the distributor)
2.5 Start to use
2.6 Energy saving tips
•
The appliance should be located in the coolest area of the room, away from
heat producing appliances or heating ducts, and out of the direct sunlight.
•
Let hot foods cool to room temperature before placing in the appliance.
Overloading the appliance forces the compressor to run longer. Foods that freeze
too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in
•
the appliance. This cuts down on frost build-up inside the appliance.
•
Appliance storage bin should not be lined with aluminum foil, wax paper, or
paper toweling.
appliance less efficient.
•
Organize and label food to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon as
possible.
Before initial start, keep the refrigerator still for half an hour
before connecting it to power supply.
Before putting any fresh or frozen foods, the refrigerator
shall have run for 2-3 hours, or for above 4 hours in summer
when the ambient temperature is high.
Please pull out the plug in case of power failure or cleaning.
Do not connect the refrigerator to power supply withing five
minutes to prevent damages to the compressor due to
successive starts.
Liners
interfere
with
cold
air
circulation,
9
making
the
V.1
Publicidad
