Technics SL-1210G Instrucciones De Funcionamiento página 19

Armlift height
Make an adjustment according to your
cartridge if necessary.
Preparation
z Put a record on the turntable.
z Remove the stylus cover, taking care not
to damage the stylus, then release the arm
clamp.
z Lift the cue lever and move the tone arm over
the record.
1
Check the armlift height (distance
between the stylus tip and record
surface).
If adjustment is needed, go to
step 2 .
z The armlift height is factory-adjusted to
8 to 13 mm.
2
Return the tone arm to the arm
rest, clamp it with the arm clamp
and while pressing the armlift
down with your finger, turn the
screw to adjust the height.
z Turning the screw clockwise lowers the
armlift.
z Turning the screw anti-clockwise raises
the armlift.
Armlift
Armlift screw
Arm clamp
Adjusting the turntable startup/
brake speed
You can choose manual mode or auto mode.
(Factory setting: Auto mode)
Auto mode
„
We recommend auto mode that can maximize
performance of the product. It adjusts the
"startup speed" (described below) automatically.
(The set torque control is not reflected.)
Move the mode switch to [A] using a tool

such as a thin screwdriver.
Manual mode
„
Allows you to adjust the "startup speed" manually.
Move the mode switch to [M] using a tool

such as a thin screwdriver.
Startup speed
You can adjust the startup speed (the time for
the turntable to reach the constant speed) from
pressing [START-STOP] and the torque gain at
the constant speed.
Adjust the torque knob using a flat

screwdriver.
z H direction: Fast startup
z L direction: Slow startup
Brake speed
You can adjust the brake speed from pressing
[START-STOP] until the turntable stops.
(Adjustment is possible in both auto and
manual mode.)
Adjust the brake speed control knob using a

flat screwdriver.
z S direction: Slow stop
z F direction: Fast stop
Brake speed
control knob
Torque knob
M
Mode switch
A
Note
z Use a commercially available mini flat
screwdriver (2.4 mm) to adjust the torque/
brake speed control knob.
z Do not turn the knob too far using an
excessive force.
BRAKE
S
H
F
L
TORQUE
19
(19)
English