Descargar Imprimir esta página

Makita VS001G Manual De Instrucciones página 10

Barredora aspiradora inalámbrica
Ocultar thumbs Ver también para VS001G:

Publicidad

Idiomas disponibles

Idiomas disponibles

Removing the batteries
While holding down the button on the battery, lift the
battery out of the battery box.
1
Fig.13
► 1 . Button 2. Battery "1" 3. Battery "2"
The appliance will operate with either one or two batter-
ies mounted.
Mounting two batteries
With two batteries mounted side by side, battery
"1" is used first. When battery "1" is exhausted,
the appliance automatically switches to battery "2"
without a pause in operation.
NOTE: Even if battery "1" is mounted, when battery
"2" is being used, the appliance does not switch to
battery "1" unless battery "2" is exhausted or the ON/
OFF switch is turned off.
Mounting one battery
The mounted battery is detected automatically.
Operating the appliance
Main brush height adjustment
The height of the main brush (rear side only) at the bot-
tom of the appliance is adjustable. Adjust appropriately
depending on the condition of the floor to be cleaned,
the length of the main brush, etc.
Fig.14
► 1 . Main brush (rear side)
2
3
1
Turn the main brush height adjusting knob to adjust the
height of the main brush.
Turn the knob in the direction indicated by the arrow to
reduce the height of the main brush (to adjust towards
more contact with the floor).
Fig.15
► 1 . Main brush height adjusting knob 2. Main brush
height
Turn the knob in the direction indicated by the arrow to
increase the height of the main brush (to adjust towards
less contact with the floor).
Fig.16
► 1 . Main brush height adjusting knob 2. Main brush
height
NOTE: The main brushes become worn down. Check
and adjust the height of the main brushes regularly.
If it is not possible to adjust the brushes sufficiently,
replace them.
10 ENGLISH
1
2
1
2

Publicidad

loading