Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Mount the side brush.
NOTE: If the side brush is worn down to a shorter
length, replace it.
Cleaning the filters
CAUTION:
Make sure the filters are mounted
properly, and do not use the appliance when the
filters are not in place. Also, do not use filters that
are damaged or wet. Motor burnout or a breakdown
may result.
NOTICE:
The filters can be washed and reused.
To prevent damage to the filters, do not use the
following items when cleaning them.
—
Air dusters
—
High-pressure washers
—
Brushes made of hard materials such as metal
1.
Remove the waste container.
2.
While pushing on the hook of the prefilter in the
direction indicated by the arrow in the figure, remove
the prefilter.
1
Fig.61
► 1 . Prefilter 2. Hook
3.
While pushing on the hooks of the HEPA filter
in the direction indicated by the arrows in the figure,
remove the HEPA filter.
1
Fig.62
► 1 . HEPA filter 2. Hook
2
2
4.
Shake off dust, and wash the filters with water if
they are very dirty. After washing, leave the prefilter and
HEPA filter to dry in the shade; do not use them until
they are completely dry.
Fig.63
► 1 . Prefilter 2. HEPA filter
5.
To mount the HEPA filter, fit the edge of the HEPA
filter onto the grooves on the appliance, and push the
filter into place. Check that the hooks are securely fixed.
Fig.64
► 1 . HEPA filter 2. Edge 3. Groove 4. Hook
6.
To mount the prefilter, fit the protrusions on the
prefilter into the grooves on the appliance, and push the
filter into place. Check that the hook is securely fixed.
3
Fig.65
► 1 . Prefilter 2. Protrusion 3. Groove 4. Hook
22 ENGLISH
1
2
3
4
1
2
1
2
4
Publicidad
