Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Tighten the four screws to secure the multifunction
adapter in place.
1
Fig.38
► 1 . Screws
Removing the multifunction adapter
Reverse the steps of the attachment procedure.
Names of parts of multifunction adapter
3
1
4
Fig.39
► 1 . Securing latch (for Makpac) 2. Hooks A (for
PDC01 / PDC1200 / PDC1500) 3. Hook B (for
PDC1200 / PDC1500) 4. Hooks C (for PDC01)
Mounting a Makpac
(12-3/8") when mounting the Makpac.
Firmly fit the two securing latches on the left and right into the
mounting notches of the Makpac to secure the Makpac in place.
Fig.40
► 1 . Makpac 2. Securing latches
Removing a Makpac
Disengage the two securing latches on the left and right
and remove the Makpac.
4
Mounting a portable power pack
portable power pack on your back.
the multifunction adapter, make sure the cord of the portable
power pack is arranged properly. Otherwise sagging cord may
2
be scraped by the floor and disconnection, smoke, or fire result.
2
1.
hooks A and secure it in place with hook B or hook C. Confirm
1
that the portable power pack does not detach from the appli-
ance by lifting up the handle of the portable power pack lightly.
• PDC1200 / PDC1500
Fit the bottom edge of the portable power pack onto hooks
A and secure it in place with hook B. Confirm that the
portable power pack does not detach from the appliance
by lifting up the handle of the portable power pack lightly.
If the red indicator of the lock button is visible, the porta-
ble power pack is not completely locked.
Fig.41
► 1 . Portable power pack 2. Hooks A 3. Hook B
17 ENGLISH
CAUTION:
Do not exceed the height 315 mm
2
Max
315 mm
(12-3/8")
CAUTION:
Do not use the appliance with the
CAUTION:
When mounting a portable power pack on
Fit the bottom edge of the portable power pack onto
2
1
3
4. Lock button 5. Red indicator
1
4
4
5
Publicidad
