Publicidad
Idiomas disponibles
Idiomas disponibles
Side brush height adjustment
When the side brush is on, the height is adjustable.
Adjust appropriately depending on the condition of the
floor to be cleaned, the length of the side brush, etc.
Turn the side brush height adjusting knob to adjust the
height of the side brush.
Turn the knob in the direction indicated by the arrow to
reduce the height of the side brush (to adjust towards
more contact with the floor).
Fig.20
► 1 . Side brush height adjusting knob
Turn the knob in the direction indicated by the arrow to
increase the height of the side brush (to adjust towards
less contact with the floor).
Fig.21
► 1 . Side brush height adjusting knob
NOTE: The side brush becomes worn down. Check
and adjust the height of the side brush regularly. If it is
not possible to adjust the brush sufficiently, replace it.
1
1
Starting cleaning
CAUTION:
Hold the appliance firmly during
use. Also, do not leave the appliance unattended
regardless of whether the appliance is on a slope
or not. The appliance may move and cause an
accident.
CAUTION:
Do not rotate the brushes or start
the filter shake function when the waste container
or dust bag are not attached to the appliance.
CAUTION:
Do not touch rotating brushes.
There is a danger of injury.
CAUTION:
Do not use the appliance to collect
items that could become tangled in the brushes,
such as cords, string, or wire. Doing so may
cause a breakdown. Clear away string-like refuse
beforehand.
CAUTION:
Do not use the appliance in unsta-
ble places such as locations where the floor has
a steep slope or is very slippery. There is a danger
that operation could be unstable or the appliance
could tip over.
CAUTION:
Wear protective equipment such
as a mask, glasses and gloves when cleaning in a
dusty environment.
Cleaning
NOTICE:
Do not turn the ON/OFF switch forcibly
without pressing the lock off button.
1.
Turn the ON/OFF switch with pressing the lock off
button to the "I" position to turn on power.
2
3
Fig.22
► 1 . ON/OFF switch 2. Lock off button 3. Control
panel
2.
If necessary, change settings by pressing the
function switches on the control panel. (Refer to
"Control panel operations.")
12 ENGLISH
1
Publicidad
