Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
PROBLEM
If Stand Mixer warms up during
use
If the Flat Beater hits the Bowl
The Speed Control Lever does
not move smoothly or easily
If your Stand Mixer should fail
to operate, please check the
following
NOTE: If the problem cannot be corrected, See the "Limited Warranty and Service" section. Do
not return the Stand Mixer to the retailer; retailers do not provide service.
LIMITED WARRANTY AND SERVICE
®
KITCHENAID
PRODUCT WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA,
PUERTO RICO, AND CANADA
This limited warranty extends to the original purchaser and any succeeding owner for the product operated in the 50 United States, the
District of Columbia, Puerto Rico, and Canada.
Length of Warranty: One Year Limited Warranty from date of delivery.
WARNING
Electrical Shock Hazard
Under heavy loads with extended mixing time periods,
you may not be able to comfortably touch the top of the
unit. This is normal.
Stop the Stand Mixer. See the "Product Assembly"
section and adjust the Beater to Bowl Clearance.
To move the Speed Control Lever with ease, lift slightly
up as you move it across the settings in either direction.
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working
order? If you have a circuit breaker box, be sure the
circuit is closed.
Turn off the Stand Mixer for 10-15 seconds, then turn it
back on. If the Stand Mixer still does not start, allow it to
cool for 30 minutes before turning it back on.
SOLUTION
15
Publicidad
