Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Slide and rotate the accessory, aligning over the pin on the shaft.
5.
Unlock the Motor Head and move it down. Then, lock
mixing, test lock by attempting to raise the Motor Head.
(OPTIONAL) To adjust Beater to Bowl Clearance: Tilt back and lock
the screw slightly counterclockwise (left) to raise the beater, or clockwise (right) to lower it.
NOTE: If you overadjust the screw, the Bowl lock lever may not lock into place.
***Locking option is available on selected models.
8
1
2
***
the head to keep it down. Before
***
the Motor Head. Turn
Publicidad
