Operating And Adjusting; Safety-Relevant Information; Desktop Height Adjustment - Steelcase Migration SE Instrucciones De Uso

_______________________________________________________________
5 Operating and
adjusting

5.1 Safety-relevant information

The Migration SE desk may only be used and
operated when in a technically perfect condition and
in compliance with the user's manual.
Before changing the height of the desk, ensure that:
The desktop is level. In case of uneven floors,
■
you can adjust the height using the adjusting
screws on the feet.
That no persons or objects (e.g. open doors or
■
windows) are in the lifting range, or protrude
into the lifting range.
No one is on the desk.
■
The maximum permissible load-carrying capacity
■
of the desk is not exceeded.
Crushing or tripping hazard at the
Migration SE Fence!
Risk of minor injury or material damage.
 Carefully open and close the fence.
Carefully step over fence feet.

Do not store any objects in the fence.

Fig. 5-1: Safety labels for Migration SE Fence
Optimum desktop height
The adjustment to the optimum desktop height
(sitting height) is crucial for the correct sitting
posture at the workstation. The correct desktop
153310

Operating and adjusting

height setting for the workstation can be found in the
workstation analysis (pursuant to the German
Occupational Safety and Health Act, the German VDU
Ordinance, or accident prevention regulations, for
example). See also BGI 650: Screen and office
workstations. Design guidelines.
Danger due to voltage!
Contact with voltage can cause severe
injury or death due to electric shock!
Attach or detach connectors only when

the equipment is de-energised.
 Do not open the housings of the
following components:
Controller
–
Columns
–
Control panel
–
Danger due to voltage!
The metal parts of the desk can become
energised if live cables and connections
are damaged.
Do not earth electrical devices on the

desk frame.
Risk of injuries and damage!
The fastening screws could tear if the desk
is lifted by the desktop or the attached
components.
 Always take hold of the desk at the
underframe to transport or move it.
 Do not load the CPU holder with a
weight higher than the maximum
permissible weight.
Ensure that the connecting cables of all
devices on the desk are long enough.

5.2 Desktop height adjustment

The height of the Migration SE desk is adjusted via
an electrically powered, stepless lifting mechanism
EN
11