Maintenance; Safety-Relevant Information; Functional Check; Table Of Functional Checks - Steelcase Migration SE Instrucciones De Uso

_______________________________________________________________
7

Maintenance

7.1 Safety-relevant information

Only appropriately qualified and
authorised personnel may carry out
maintenance and repair work.
Only use suitable tools for all these
operations.
A damaged mains cable must be replaced
by the manufacturer, the manufacturer's
customer service staff or similarly
qualified personnel to prevent hazards.

7.3 Table of functional checks

Interval
During assembly
EN
Before each
height adjustment
Regularly
Table
7-1: Functional checks

7.4 Maintenance work

Only authorised and qualified personnel may carry
out maintenance work. For more information, please
contact our Customer Service Department. (see
Service
).
18
Inspection point

Functional check

Frame parts Position of the desktop
cross-member
Immediate Check safety distance
environment of the
desk
Desktop Check for horizontal
alignment
Connections of the Check the insulation for
electrical supply lines damage
(cables)
Insulation of the Check the insulation for
electrical supply lines damage
(cables)
Surroundings of the Check clearance to hot
electrical supply lines objects (e.g. radiators)
(cables)
7.2 Functional check
The Migration SE desk components should be
checked for correct functionality at regular intervals.
Pay particular attention to the electrical connections:
The electrical equipment of the desk must
be checked regularly. Rectify defects such
as loose connections or damaged cables
immediately.
Attach or detach connectors only when
the equipment is de-energised.
The plug of the desk must be easily
accessible at all times.
Required condition
Desktop cross-
member completely
inserted in the guides
and firmly bolted
No objects in the
lifting range
Horizontal
No damage
No damage
Sufficient distance
9
Maintenance
Measure (if required)
 Loosen the screws, insert
the desktop cross-mem-
ber correctly and firmly
tighten the screws

Remove any objects
 Align using the adjusting
screws on the feet
 Replace the connections
 Replace the cables
 Establish distance
153310