Risk Of Injury; Exclusion Of Liability - Steelcase Migration SE Instrucciones De Uso

_______________________________________________________________
Before adjusting the height of the desk, make sure
that the desktop is level. If the floor is uneven, align
the desktop with the adjusting screws on the feet.
Ensure that there are no objects in the movement
range of the lift column!
Danger due to voltage!
Contact with voltage can cause
severe injury or death due to electric
shock!
 Attach or detach connectors only when
the equipment is de-energised.
 Do not open the housings of the
following components:
- Controller
- Columns
- Control panel

Risk of injury!

Unintentional lifting or lowering of the
desktop may cause injury.
For maintenance work on all non-

electrical components of the desk,
detach the electrical connection of the
height adjustment unit from the mains.
Risk of injury or damage!
The fastening screws could tear if the
desk is lifted by the desktop or the
attached components.
 Always take hold of the desk at the
underframe to transport or move it.
ATTENTION
Risk of damage to lift mechanism!
153310
ATTENTION
The values saved in the controller do
not match the values for another desk.
After disassembling the desk, for example for
transport reasons:
Always reattach the two side

frames to the associated
desktop cross-member of the
same desk.
 Comply with the separate
assembly instructions in this
regard.
ATTENTION
Using unapproved spare parts may
cause damage to the desk.
Only components provided by Steelcase

may be used as spare parts. Coordinate
the installation of differing parts with
Steelcase.
Comply with the specified

maintenance and inspection
intervals.

7.4.1 Exclusion of liability

Steelcase assumes no liability or warranty in the
Liability, Page 2
following cases (see
Inadequate monitoring of the product
■
components (functional checks).
Improper maintenance.
■
Maintenance by a third party.
■
Maintenance by unqualified and unauthorised
■
personnel.
Use of components and adaptations that do not
■
originate from Steelcase.
Unapproved modifications to the product with
■
regard to its design and configuration.
Deliberate incorrect operation.
■
1.1 Intended Use
Improper use (see
■
Maintenance
EN
):
).
19