Cd Playing; Basic Operations; Loading Discs; Playing Discs - Aiwa NSX-F77 Manual De Instrucciones

CD PLAYING

BASIC OPERATIONS

LOADING DISCS

Press the CD button, then press the x
button to open the disc compartment. Load disc (s) with
the label side up.
To load one or two discs, place the disc(s) on the tray(s) in the
direction of the arrows as illustrated.
To load three to five discs, press the DISC CHANGE button to
rotate the trays after placing two disc. Place the next disc on the
empty tray. Each time the DISC CHANGE button is pressed, the
trays rotate and one disc can be placed.
After placing the disc, press the x OPEN/CLOSE button to
close the disc compartment.
The display shows the information of the disc to be played.
Total number of tacks
Tray number of the disc to be played
9
ENGLISH
x OPEN/CLOSE x x x
Total playing time

PLAYING DISCS

Load discs.
To play all discs in the disc compartment, press the d
button.
All discs are played once.
Elapsed playing time
Number of track being played
To play one disc only, press one of the DISC DIRECT
PLAY buttons.
The disc with the selected tray number is played once.
Only the selected disc tray number is surrounded.
To play with the remote control
Press the DIRECT button, then press one of the numeric buttons
1 to 5 within 3 seconds to select a disc.
To stop play, press the s button.
To pause play, press the a button. To resume play, press again.
To search for a particular point during playback, keep the
f or g button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback, press
f or g button repeatedly.
To remove discs, press the x OPEN/CLOSE button.
You can remove the two discs that face you. When the disc to
be removed does not face you, press the DISC CHANGE button
repeatedly.
To start play when the power is off (Direct Play Function)
Press the CD button. The power turns on and play of the loaded
disc begins.
To replace discs before play, press the x OPEN/CLOSE button
to open the disc compartment.
To check the remaining time
Press the EDIT/CHECK button on the remote control during play.
The amount of time remaining until all tracks finish playing is
displayed. To restore the playing time display, press the EDIT/
CHECK button.
Selecting a track with the remote control
1 Press the DIRECT button, then press one of the numeric
buttons 1 to 5 within 3 seconds to select a disc.
2 Press the numeric buttons and the +10 button to select a
track.
Example:
To select the 25th tack, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.
The selected track starts to play and play continues to the
end of that disc.