Sound; Adjusting The Sound - Aiwa NSX-F77 Manual De Instrucciones

SOUND

ADJUSTING THE SOUND

VOLUME CONTROL
Turn the VOLUME control on the main unit, or press the
VOLUME buttons on the remote control.
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound.
It also enriches the KARAOKE function to make your voice sound
clear and pleasant.
Press the BBE button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
Low frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is originally
emphasized. In this case, cancel the T-BASS system.
GRAPHIC EQUALIZER
This unit provides the following three different equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with heavy bass and fine treble
Press one of the GEQ buttons.
To cancel the selected mode
Press the selected button again. GEQ OFF is displayed.
To select with the remote control
Press the GEQ button repeatedly. The GEQ mode is displayed
cyclically as follows.
ROCK POP
SOUND ADJUSTMENT DURING
RECORDING
The output volume and tone (except BBE) of the speakers or
headphones may be freely varied without affecting the level of
the recording.
Recording with BBE
The desired source can be recorded with the BBE function to
enhance the clarity of high-frequency sound. When playing back
a tape recorded with BBE, it is recommended that BBE be set to
off.
Using the headphones
Connect headphones to the PHONES jack with a stereo standard
1
plug (ø6.3 mm, / inch).
4
No sound is output from the speakers while the headphones are
plugged in.
To change the spectrum analyzer display
3 patterns of spectrum analyzer display can be shown. Press
the POWER button while pressing one of the GEQ buttons. When
the power is turned off, the selected display pattern is canceled.
CLASSIC GEQ OFF
(cancel)
ENGLISH
En
6