Mounting The Loop Handle - Stihl KM 55 Manual De Instrucciones

English / USA
11
10
8
9
4
Fitting the control handle
: Release the screw (8) and remove it
with the washer. The nut (9) remains
in the control handle (10).
: Push the control handle onto the
handlebar (4) – the throttle trigger
(11) must point towards the
gearhead.
: Line up the holes (12).
: Fit screw and washer in control
handle and tighten down firmly.
* see "Guide to Using this Manual"
12
12
Fitting the throttle cable
Do not kink the throttle cable - make
sure the throttle trigger moves freely.
: Push the throttle cable (13) into the
retainer (14).
12
13
14
14
13

Mounting the Loop Handle

2
1
Loop handle with barrier bar
: Insert square nuts (1) in the
barrier bar (2).
: Line up the holes.
1
KM 55