Setting The Playback Eq (Sound Eq) - Panasonic RR-XS450 Instrucciones De Funcionamiento

Setting the playback EQ (SOUND EQ)

Using the sound EQ enables you to set bass, middle and treble range of volume level according to your
preferred settings for playback.
The sound EQ includes 6 types of fixed mode and the "USER" mode with which you can set the volume
level according to each frequency band.
The sound EQ is effective only when listening with the earphones.
• Put the unit into the stopped state or playback state.
1
Press [MENU].
(When playback is in progress, go to step
2
Press +, – to select "PLAY MENU" and
press [q OK] to enter.
3
Press +, – to select "SOUND EQ" and press
[q OK] to enter.
4
Press +, – to select the sound EQ mode.
Press [F1 (CONFIRM)] to confirm the details. Press
[F1] again to return to the previous screen.
When you select modes other than "USER", go to step
Setting when selecting "USER":
4
After step , press
1
[F1 (EDIT)].
150 Hz band is selected.
Press u, i to select the frequency band to
2
change, and press +, – to adjust the volume level
(±6 dB).
3 Whe
change are all complete, go to step
5
Press [q OK] to enter.
3
.)
To exit the setting screen, press [F2 (CLOSE)].
EQ mode
The sound equalizer function is not used. You
FLAT
5 .
hear the original sound without any change.
BASS Emphasise the bass range strongly.
CLEAR Emphasise the treble range strongly.
HEAVY Emphasise the bass and treble ranges slightly.
SOFT Emphasise the middle range.
VOICE Reduce noise to make human voice easily heard.
This mode enables adjustment of frequency bands
USER
of 150 Hz, 500 Hz, 1 kHz, 4 kHz and 12 kHz.
(The factory setting is "FLAT".)
n the settings for the frequency band to
The selected sound EQ
mode is displayed.
Effect and application
5
.
45
45