Tabla de contenido
Publicidad
Inserting the battery/Charging
3
Slide the OPR/HOLD switch to the [ON] side.
4
Slide the OPR/HOLD switch to the [OFF]
side.
Status indicator
The status indicator lights and recharging starts.
Also, "CHARGING" is shown in the unit's display and
the battery indicator changes as shown below.
CHARGING
*
While charging, sliding the OPR/HOLD switch to the
[ON] side can cancel charging halfway.
*
When the status indicator goes out, charging is complete.
g Disconnecting the unit
Double-click the icon (Windows XP: [
Windows 7: [
]) on the task tray at the bottom of the
computer screen and follow the on-screen instructions
to remove the unit. (The icon may not be displayed
depending on the OS settings.)
8
After the unit is removed, this unit turns off.
8
*
*
OPR/HOLD
switch
*
*
*
*
*
*
*
], Windows Vista/
If BATT. SETTING in the common menu is set to
"ALKALINE", the battery cannot be charged.
When using a rechargeable battery, use the supplied
rechargeable battery or the optional rechargeable
battery (➜ page 2). If commercially sold batteries
other than the above are used, operation is not
guaranteed. Do not charge a dry cell battery.
If charging does not start, slide the OPR/HOLD switch
to the [ON] side once, and then to the [OFF] again.
If the temperature of this unit has risen, an
undesignated rechargeable battery has been inserted,
or BATT. SETTING has been set to "ALKALINE", "
is displayed. (➜ page 77)
When the computer is in sleep mode or is restarted,
recharging may be impossible.
Charging is possible even during data transfer.
The rechargeable battery does not need to be fully
depleted before recharging.
The rechargeable battery or this unit may become hot
while charging, but this is not a malfunction.
If the usage time becomes remarkably short even
though the battery is fully recharged, the battery
has reached the end of its lifespan. Purchase a new
rechargeable battery (➜ page 2).
"
Publicidad
Tabla de contenido
