Descargar Imprimir esta página

Timex Intelligent Quartz W273 Manual De Uso página 45

Ocultar thumbs Ver también para Intelligent Quartz W273:

Publicidad

Idiomas disponibles

Idiomas disponibles

3 TIME ZONE FUNCTION
Your watch has the ability to display three time zones:
1. Hour and Minute hands: Displays the time in a stan-
dard 12 hour format. Please note: The date displayed
in the date window is linked to the time displayed by
these two hands.
2. 4th center hand and inner ring: Displays the time in a
24-hour format.
3. 4th center hand and case rotating top ring: Displays
the time in a 24-hour format.
4TH CENTER HAND ADJUSTMENT
To readjust a misaligned 4th center hand:
1. Pull the crown out to position 3.
2. 4th center hand should point to 12 o'clock. If within
5 seconds of pulling the crown to position 3 the 4th
84
center hand does not point to 12 o'clock, press button
A to move the hand clockwise until it points to 12
o'clock. Pressing and holding button A will make the
hand move at a fast rate.
3. Push crown in to position 1 when finished.
4TH CENTER HAND CALIBRATION
The 4th center hand is calibrated at the Timex factory to
reflect the standard minutes within the hour as defined
by Universal Time Coordinated. Globally a majority of
locations use the standard minutes. If the location you are
using for the 2nd and 3rd time zone uses the standard
minutes, the 4th center hand does not require recalibra-
tion. Only if you wish to have the second and third time
zones to reflect locations that do not follow the standard
minute, the instructions to recalibrate the 4th center hand
are as follows:
85

Publicidad

loading