Publicidad
Idiomas disponibles
Idiomas disponibles
MEMORY FUNCTIONS
Recalling Measurements in Memory
This monitor stores and recalls up to 60 measurements,
plus an average of the last three measurements in memory.
These measurements can be shared with your physician or
trained healthcare professional.
1. When the monitor is off, press and release
the MeM button. The average blood
pressure and pulse measurement of the most
recent three readings will show with the M
and AVG icons on the screen, Fig 1.
2. Press the MeM button again to begin
scrolling through all of the measurements
from most current to oldest.
each measurement will indicate the date and
time taken, the measurement and pulse
reading, hypertension Indicator results and
Irregular heartbeat if present, Fig 2.
noTe: on the lower left of the display, the
date/time will alternate showing what time
and date the measurement was taken.
3. After you've scrolled through all the
readings, the display will cycle back to the
first reading in memory. Press START/SToP
to turn the unit off.
When the number of readings exceeds 60, the
oldest data will be replaced with the new
record.
16
– English
Fig. 1
Fig. 2
Publicidad
