Memory Functions - smartheart 01-542 Manual De Instrucciones

MEMORY FUNCTIONS

Recalling Measurements in Memory
This monitor stores and recalls up to 60 readings in per user. These
measurements can be shared with your physician or trained healthcare
professional.
The memory recall will default last memory bank in use. To select the
memory bank for review:
Press and release the POWER button.
1.
The user will show on the display. Press MEM/SET to toggle between
2.
User 1 and User 2.
Press POWER to confirm the user for review
3.
and press again to turn the unit OFF.
4. Press MEM/SET to enter the memory bank
review function.
Recalling Measurements in Memory
1. Press and release the MEM/SET button. The
unit will first display the average of the last
three measurements, Fig 1. If less than three
measurements are in memory, the most recent
result will be displayed.
2. Press the MEM/SET button again to begin
scrolling through the saved measurements.
Measurements will appear on the display from
most current to oldest.
3. All results for a given measurement will display,
including measurement results, pulse rate,
Hypertension Indicator and Irregular Heartbeat
alert (if applicable). The date/time stamp will
18 • ENGLISH
Fig. 1
Fig. 2