Memory Functions - smartheart 01-539 Manual De Instrucciones

MEMORY FUNCTIONS

Recalling Measurements in Memory
This monitor stores and recalls up to 60
measurements per memory bank, 120 total, plus an
average of the last three measurements in each
bank. These measurements can be shared with your
physician or trained healthcare professional.
1. Press and release the MEM button. The display
will show the last memory bank used, u1 or u2,
and the number of measurements in that bank,
Fig 1. Press the START button if you wish to
select a different memory bank.
2. Press the MEM button again to review the saved
measurements. The first reading displayed is the
average of the last three measurements in that
bank , Fig 2. The average blood pressure
measurement and pulse will display separately
on the screen alternating repeatedly every 2-3
seconds, the A will remain on the display.
3. Press the MEM button again to scroll through all
of the measurements. each measurement will
indicate the date and time taken, the
measurement and pulse reading, hypertension
Indicator results and Irregular heartbeat if
present, Fig 3.
4. After you've scrolled through all the readings,
the display will cycle back to the first reading in
memory. Press START to turn the unit off.
When the number of readings exceeds 60, the
oldest data will be replaced with the new record.
18 • ENGLISH
MEM
MEM
MEM
Blood
Pressure in
Memory
MEM
Pulse Rate
in Memory
MEM
Fig. 1
Fig. 2
Fig. 3