MEMORY FUNCTION
Recalling Measurements in Memory
Select the desired user, 1 or 2, before measurement
The user icon displayed represents the memory bank where the measurement result
will be stored.
1. When the monitor is OFF, press and release the S button. The display
turn on and the current user, 1 or 2.
2. Press S again to toggle between user 1 or 2.
3. Press START STOP to confirm the memory bank to review.
This monitor stores and recalls up to 60 readings per user.
These measurements can be shared with your physician
or trained healthcare professional.
1. When the unit is OFF, press and release the M button
to select the memory bank for review.
2. The unit will first display the average of the last three
measurements, Fig 1.
3. Press the M button again to begin scrolling through
the saved measurements. Measurements will appear
on the display from most current to oldest; the
memory number will appear flashing at the bottom of
the screen next to the measurement that was taken.
4. All results for a given measurement will display,
including measurement results, pulse rate,
Hypertension Indicator and Irregular Heartbeat alert
(if applicable). The date/time stamp is at the bottom
right of the display, Fig 2.
18 • ENGLISH
.
Fig. 1
Fig. 2