Maintenance And Cleaning; Technical Specifications; Appendix - Futurelight AS - 200 Advertising Scan Manual Del Usuario

Disconnect from mains before starting maintenance operation !
It is absolutely essential that the projector is kept clean and that dust, dirt and smoke fluid residues must not
build up on or within the projector. If this happens, the light output from the projector will be significantly reduced.
Regular cleaning will not only ensure the maximum light output, but will also allow the projector to function
reliably throughout its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,
under no circumstances should alcohol or solvents be used!
The front mirror and objective lens will require monthly cleaning as smoke fluid tends to building up residues,
reducing the light output very quickly. The cooling fan should also be cleaned monthly.
The gobos may be cleaned with a soft brush.
The dichroic colour filters, the gobo-wheel and the internal lenses should be cleaned every three months.
The interior of the projector should be cleaned at least annually using a vacuum cleaner or air jet. To ensure a
proper function of the rotating gobos, we recommend lubrication in six month intervals. The quantity of oil must
not be excessive in order to avoid that oil run out when the gobo wheel rotates.
Power supply
- Power supply:
- Power consumption:
- Fuse:
Lamp
MSD 200 W GY-9,5 Lamp
- Lamp life:
- Article designation:
- Article no.:
Slides
- Up to 5 slides can be inserted in the slide-wheel
- All kinds of D-size gobos can be used for the slide-wheel
Motor
- 8 microstepping stepper motors controlled by microprocessors
Electronics
- Digital serial input DMX-512
- 11 or 8 control channels, respectively
Housing
- Easy access to lamp and main components thanks to large opening cover
Battery backup
- Stores your settings for up to 2 years
Dimensions and weight
- W x H x D: 532 x 212 x 215 mm
- Weight: 15 kg
Please note: All specifications are subject to change withour prior notice.
Errors and omissions excepted.
We hope you will enjoy your AS-200. We can assure you that you will enjoy this device for years if you follow the
instructions given in this manual.
Should you have further questions, do not hesitate to contact your local dealer.
© 9/98

6. Maintenance and cleaning

DANGER TO LIFE !

7. Technical Specifications

230V/50 Hz
400W
T3.15A
approx. 2000 hours
MSD/HSD-Lamp 200W, socket GY9.5 2000h
91010250

8. Appendix

33