Package Contents; Description Of The Product; Switching Off The Collar - Num'axes Canicalm Premium Manual De Instrucciones

Package contents

- a collar equipped with short contact points
- a nylon strap
- a screwdriver
- this user's manual

Description of the product

Setting screw for barking
detection sensitivity
Screwdriver
Switching On the collar
- Remove the 4 screws from the battery cover.
- Remove the battery cover.
- Insert the 3 Volt CR 2 lithium battery paying attention to the polarity indicated on the battery housing
(See diagram 1).
- Beeps sounds are emitted indicating the collar is ready for use.
If you do not hear any beep sound after inserting the battery, immediately remove it from its
housing. Check the polarity before inserting the battery once again.
- Replace the battery cover.
- Retighten moderately the 4 screws.

Switching Off the collar

To switch Off the collar, remove the battery from its housing.
ide CANICALM Premium I 110x115.indd 12
Diagram. 1
- a neon test lamp
- a 3 Volt CR 2 lithium battery
- a pair of long contact points
Polarity "-" of the battery
Button to change operating
mode
Polarity "+" of the battery
Gb - 12
18/05/2017 08:4