Use Of The Product; Safety Precautions - CARLO GAVAZZI LDD1 Manual De Instrucciones

Idiomas disponibles

1. Introduction

This manual is a reference guide for Carlo Gavazzi Loop Detector LDD1 and LDD2. It describes the product

specifications as well as how to install, set up and use the product for its intended use.

1.1 Description

Carlo Gavazzi Loop Detectors are devices designed and manufactured in accordance with IEC international

standards and are subject to the Low Voltage (2014/35/EU) and Electromagnetic Compatibility (2014/30/

EU) EC directives.

All rights to this document are reserved by Carlo Gavazzi Industri: copies may be made for internal use

only. Please do not hesitate informing us to make any suggestions for improving this document.

1.2 Validity of documentation

This manual is valid only for LDD1 and LDD2 Loop Detector and until any newer documentation is published.

This instruction manual describes the functions, operations and installation of the product for its intended

use.

1.3 Who should use this documentation

This manual contains important information regarding installation and must be read and completely

understood by specialized personnel dealing with these kinds of devices.

We highly recommend that you read the manual carefully before installing the Loop Detector. Please save

the manual for future use. The installation manual is intended solely for qualified technical personnel.

1.4 Use of the product

The Loop Detector is primarily used to detect vehicles such as cars, trucks, buses and others.

A loop in the ground is required for the Loop Detector to detect any vehicles above the loop. The device

works on the same principle of an inductive sensor; utilizing the phenomenon of eddy current. When a

metal target/vehicle approaches on top of the loop, the magnetic field generated by the loop interacts with

the target and makes the Loop Detector to change its output.

The Loop Detector can be used at carpark barriers, bollards, gates, toll gantries and many other door

access applications.

This Loop Detector must not be used in applications where personal safety depends on the function of the Loop

Detector.

Installation and use must be carried out by trained technical personnel with basic electrical installation knowledge.

The installer is responsible for correct installation according to local safety regulations and must ensure that a

defective Loop Detector will not result in any hazard to people or equipment. If the Loop Detector is defective, it

must be replaced and secured against unauthorized use.

1.6 Other documents

It is possible to find the datasheet, manuals, brochures and electrical drawings on the Internet at

http://gavazziautomation.com

Tabla de Contenido

Ldd2