Front Panel
1 2
1. INPUT jack
Plug your guitar in here, ensuring you use a shielded guitar cable.
2. Channels
This amp has 2 channels, and each channel has 2 modes.
Channels can be selected with the CHANNEL switch.
Please set this switch to FSW position, to enable the optional foot switch.
2-1. CH1
CH1 has 2 modes, CLEAN and CRUNCH.
This channel has GAIN, TONE and VOLUME controls.
In addition, you can tweak your tone with the versatility of the BRIGHT and FAT switches.
2-2. CH2
CH2 has 2 modes, RHYTHM and LEAD.
This channel has GAIN, TREBLE, MIDDLE, BASS and VOLUME controls.
In addition, you can tweak your tone with the versatility of the BRIGHT, FAT and MID-SHIFT switches.
3. REVERB
This amp has a high quality digital reverb inside.
This can be switched On or Off by the foot switch.
4. PRESENCE, RESONANCE
These controls allow more detailed voicing of your tone.
PRESENCE controls the high-end frequency, whereas RESONANCE controls the low-end frequency.
5. MASTER1, 2
This amp has 2 MASTER volume controls, that can be switched by the foot switch.
Please use MASTER1 as a normal MASTER volume.
MASTER2 can be selected only when you connect a foot switch.
Setting this higher will push the Nutube in the power amp, into greater saturation.
6
2-1
3
2-2
4
5