Amate Audio TPD Manual De Usuario página 27

TPD
7.4.5 File Menu
 Open: Load a preset from a previously stored file.
 Save: Save current preset to a file in the hard disk.
 Restore Presets: Load a set of presets from a previously stored file.
 Backup Presets: Backup all the presets of the device to the hard disk.
7.4.6 Hardware Menu
 Enter Password: Enter a password here to unlock the unit (only needed if the
unit has been previously locked using the option "Hardware>Lock Unit").
Enter here the password to gain access to the Admin features.
 Configure:
o Change password: change the factory default password. The new
password may have up to 8 characters. You will be first asked for the
old password. NOTE: The factory default password is "Password"
(case sensitive)
o Power On Preset: Set here the preset that will be selected at startup.
The default setting is "last setting".
o Access rights: select which controls will be unlocked even the "Lock
Unit" control is selected. Click on the checkbox of the functions that
should be available to the user without entering a password:
 Lock unit: In order to lock the unit by password, select "Hardware > Lock
Unit". To unlock the unit again, select "Hardware > Enter Password".
 Set Pin: Set a 4-digit pin to allow the access to the unit via software. If the
PIN needs to be removed, select this function and leave the PIN field blank
(the message "Invalid PIN" will be shown). If the PIN is forgotten, a firmware
upgrade is needed (see Chapter 8).
 Status Details: A quick information window about the device is displayed.
27
Jul 2016
Amate Audio