Switching On And Setting The Thermometer; Setting The Basic Functions - Beurer medical FT 90 Manual De Instrucciones

Non-contact forehead thermometer FT 90
EN

6. Switching on and setting the thermometer

The measuring sensor should be cleaned before and after each use, to eliminate
dirt and fi ngerprints and ensure accuracy of your readings.
Briefl y press the On/Off button
After a brief self-test and two short beeps the thermometer is ready for forehead measure-
ment.
The device always starts up in forehead temperature mode

6.1 Setting the basic functions

This menu allows you to set the following functions individually, one after another.
Time
format
• With the thermometer switched on, press and hold
the LIGHT/SET button for 5 seconds.
The time format option fl ashes on the display (fi g. 1).
• Use the MODE/MEM button to set your preferred
time format and confi rm with the LIGHT/SET button.
10
.
Date Time
.
Temperature Acoustic
meas. unit
Fig. 1
Illuminated
signal display