Beurer medical FT 90 Manual De Instrucciones página 15

Hold the thermometer 0.78" – 1.18" from the indicated point on the
middle of the forehead (Fig.8) and press the Start-measurement
button. The end of measurement is signaled by a long beep. The
measuring time is usually less than 1 second. Release the Start-mea-
surement button. You can now read the measurement value.
Note: Only one single measurement is taken at a single spot in the mid-
dle of the forehead.
In addition to the temperature, the fever
appears in the display:
The no fever symbol
fever symbol indicates a measurement of over 100.4°F, i.e. temperature alarm.
The device is ready to take another measurement when two short beeps sound and the
forehead symbol
The measurement is automatically saved with the date/time and the "fever"
"no fever" classifi cation.
Note:
• It is not necessary to fi nd an artery as the FT 90 (oral measurement equal) reads oral
temperature based on the skin and ambient temperature of one point in the middle of
the forehead.
• There is no need to scan across the skin.
• Holding the thermometer in one place too long may cause a higher ambient tempera-
ture reading which could make the body temperature reading lower than usual.
indicates that the body temperature is within normal range; the
stops fl ashing.
or no fever symbols also
Fig. 8
/
15