Cleaning The Device - Beurer medical FT 90 Manual De Instrucciones

Non-contact forehead thermometer FT 90
EN
Note: The codes below are printed on batteries containing harmful substances:
Pb = battery contains lead, Cd = battery contains cadmium, Hg = battery
contains mercury. The batteries in this device do not contain any pollutants.

11. Cleaning the device

NOTICE:
• Do not subject the device to mechanical impacts.
• When not in use, store the thermometer in the provided storage case.
• Do not expose the device to liquids. The device is not waterproof. Avoid all
direct contact with water or other liquids.
• Do not expose the device to direct sunlight.
• Clean the measuring sensor before each use.
• Do not touch the measuring sensor with fi ngers.
• The measuring sensor is the most sensitive part of the thermometer. Take great
care of the measuring sensor when cleaning the device.
• Do not use any harsh cleaning products.
• Always observe all safety notes for user and device.
Safety notes
Clean the measuring sensor after each use. Use a clean cloth or cotton bud that can be
moistened with disinfectant or 70 % alcohol.
To clean the entire device, please use a soft cloth slightly moistened with a mild soapy solu-
tion. Under no circumstances may liquid enter the device.
Do not use the device again until it is completely dry.
20
Page 2 – 6.
Pb Cd Hg